How to Connect Signature BS-3 to Skywave X100 / X100 Dual via Auracast

Part 1. Power On Your Devices and Enable Bluetooth on Your Phone

Before starting the connection process, make sure both devices are powered on and Bluetooth is enabled on your phone.

1. Connect both the Skywave X100 / X100 Dual and Signature BS-3 to power, then turn them on.
2. Make sure Bluetooth is enabled on your smartphone. If it is already turned on, you can skip this step.

Enable Bluetooth When Prompted by the App

If Bluetooth is turned off, opening the Ultimea app will automatically trigger a system pop-up asking you to turn on Bluetooth.

Note: This is a system-level prompt. Its appearance, wording, and location may vary depending on your phone model and operating system version. The examples below are provided for reference only.

(1) iOS (Apple)

When the system pop-up appears, the interface will look similar to the example below:

Tap "Settings" to open your phone's Bluetooth settings.

In the Bluetooth settings, turn on Bluetooth if it is not already enabled. Under "Other Devices," you will see nearby devices that are not currently connected.

Select "Skywave X100 Dual" to connect.

(2) Android (Samsung, Huawei Example)

Android interfaces and system prompts may vary significantly across different phone brands and models. The following example uses a Samsung phone for reference.

When the system permission pop-up appears, tap "Allow" (or the equivalent confirmation option shown on your phone).

On most Android phones, Bluetooth will be enabled automatically after you grant permission. You should then remain on the Ultimea app interface and can proceed to the next step.

Part 2. Connect Skywave X100 / X100 Dual to the Ultimea App

After enabling Bluetooth, open or return to the Ultimea app to add your sound system.

Step 1. Open the Ultimea App

When connecting to the app for the first time, you will be taken to the app's home screen. No devices will be displayed yet.

Click the"+"; Redirecting to the following page:

Step 2. Select a Device Category

Click on any category to go to the matching page:

Click“Start Pairing”; Searching,please wait a moment:

All connectable devices for Ultimea were found:

Click "Skyware X100 Daul" to start the connection:

The image above indicates "Connecting," please wait a moment;

Connection successful.If you are using the APP for the first time,an APP guide will appear.Follow the guide step by step(you can skip this step if you are not using the APP for the first time):

(Multiple pages of detailed APP instructions omitted here)

The image above shows the instructions on the last page.Click "Start Now" to begin using the app. The U622A(SkywaveX100Dual)has successfully connected and the device details page is displayed:

Part 3 Enable the Auracast function on the SkywaveX100Dual

(1)Click Auracast:

(2)Access the Auracast details page:If the Skyware X100 Dual is on a non-BT channel,the following pop-up window will appear: (Note:The U622A defaults to the eARC channel upon first power-on.)

At this time,the Soundbar status is "BT" and flashing slowly.

Click "Confirm" to switch to the BT channel. 

(3)Enter the Auracast details page.By default,both "Send" and "Receive" modes are off:

To manually enable "Send" mode:Click the button after "Auracast Broadcast..." 

(4)The Auracast function of  Skyware X100Dual is successfully enabled:

At this time,the Soundbar displays "Auracast Master" once,followed by a slow flash of "BT"or a solid "BT" light.

Part 4 Add Signature BS-3

(1)After successfully connecting to the Skyware X100Daul ,return to the homepage and click the upper left corner twice:

(2)Return to the homepage and click "Add Device" to start adding:

(3)Enter the equipment category page:

Click on any category to start matching.

(4)Click “Start Pairing”:

(5)Enter the device search page and wait a moment:

(6)All connectable devices found in Ultimea:

Select "BS-3" 

(7)Enter the device connection page and wait a moment:

(8)Connection successful,Signature BS-3 details page displayed:

Part 5 Enable the Auracast function on the Signature BS-3

(1)Click "Auracast":

(2)Access the Auracast details page:By default,both "Send" and "Receive" modes are off.

To manually enable "Receive" mode:Click the button after "Receive..." 

(3)The APP automatically searches for devices that are in Auracastmode;

As shown in the image above,the Signature BS-3 has successfully connected to the  Skywave X100Dual. At this time,the indicator light on the front of theSignature BS-3 will be constantly solid inpurple.

Part 6 Normal Usage Status Description

(1)Skyware X100 Dual successfully established a connection with Signature BS-3,APP interface: SkywareX100 Dual:

Signature BS-3:

(2)Skyware X100 Dual Status: Soundbar screen BT is always on.

(3)BS-3 status:The front indicator light is solid purple. 

(4)When the mobile phone plays any audio source,the Skyware X100 Dual and BS-3 will emit sound simultaneously; The volume of Skyware X100 Dual and BS-3 can be controlled separately.

If you still have questions about the connection method, please contact support@ultimea.com for assistance.