Must read before upgrading:
① If the sound quality of the factory version meets your requirements, you don't need to upgrade the software version. (Switching versions multiple times may cause compatibility issues)
② Before upgrading this version, please make sure your factory software version is less than V143. (Press and hold the button on the right side of "surround" for 5 seconds) (Not suitable for V018/ V019 or T20/T019、V44 & V45 with App control new version )
③ Please ensure that the soundbar and the subwoofer remain connected before upgrading. Otherwise, the software versions will be inconsistent, and the subwoofer will have no sound or will not work.
④ If the device crashes and cannot be turned on after the upgrade, please contact customer service to send a "recovery file", please get in touch with support@ultimea.com.
V139 installation download: update.zip
V139 improvements:
① Adjusted the mid-frequency for clearer sound
② Added BASS level: adjusted from -2~2 to -6~6, a total of 13 levels
③ Added Surround level: adjusted from -2~2 to -3~3, a total of 7 levels
④ Soundbar volume adjustment changed from 0-40 to 0-100 levels
⑤Optimize EQ1/EQ2/EQ3 sound effects
Specific Method:
1. Copy the "update.zip" file to the USB flash drive.
Note:
① Use an empty USB flash drive, USB format: FAT32, 128GB or less capacity;
② The file doesn't need to be unzipped;
2. After the Soundbar is turned on, insert the USB flash drive into the USB port, WAITING will be displayed, and then it will automatically upgrade and the progress will be displayed. Automatically standby after the upgrade is completed.
3. Press and hold the button on the right side of "surround" for 5 seconds. If the display shows "V139", it means the upgrade is successful.
If you have any questions after downloading, please feel free to contact us, and if you have any suggestions or ideas
Please note:
This software version is only compatible with Poseidon D60 that do not support the Ultimea App.
For the 2025 new version Poseidon D60 that supports the App, please get the latest software version update in the Ultimea App.
Please do not download the wrong software, as doing so may cause the device to malfunction.
- update.zip5 MB
Comments
104 comments
Can't downgrade fron v139 to v133. When I insert the pen drive into the USB no installation starts.
Thanks Robin. I tried doing that. Despite that when i connect the USB, it doesn´t start the installation.
When you want to downgrade you have to do this to v109 and name the Zip just update on a fat32 format usb . The it will start automatic .
I tried it again after turning off the system and then put the USB again and then it worked.
Yes. I had installed v133 and v139 the same way. Only the update.zip file in the thumb drive.
Try the v109 or v83 to downgrade . I had at the beginning also trouble but when i control it again it worked
Asdren and Prashant, for me is impossible to downgrade independently of the version (i try all the possible,83-109-133).
Nicholas,
Quello zip è un formato particolare.
Contiene uno o più file .bin
Sono firmware compilati, non credo si possa agire "a mano" per aggiustare i valori, l'unica soluzione sarebbe avere una bella form online dove ti scegli i parametri, ti scegli il numero e il valore dei parametri che vorresti e poi ti compila lato server il firmware e te lo scarichi, un po' tipo firmware Marlin per le stampanti 3d, tipo il firmware opensource tasmota per i devices con modulo esp8266 per la domotica e tante altre piattaforme, sarebbe figo, noi potremmo customizzare a piacimento il firmware e l'azienda nn dovrebbe per forza di cose condividere i sorgenti che sono proprietari. Un buon compromesso per tutti ed un bel atto di "condivisione", da parte loro....
Vero! Sarebbe il top! Io ho una configurazione particolare perché estraggo l'audio tramite un hdmi extractor dalla firestick 4k max Amazon e attraverso un toslink vado alla soundbar. Dopodiché sono collegato ad un videoproiettore. Forse certe tv di buona marca ti permettono l'equalizzazione anche sull'audio output, ottico o arc che sia. Sennò bisognerebbe collegare a monte della soundbar un equalizzatore 7 bande ma li ho visti solo analogici e non digitali.
I currently use v139 and I’m almost happy with it. Have to use eq2 (dialogue) even for movies. The Movie Mode eq1 ist very Noise and Muffeld in dialogues or normal spoken worlds
Después de leer todos los comentarios de todas las actualizaciones no sé cuál versión es la mejor para D60??
Hi,
I just tried opening the update.zip file but WinRAR says the file is corrupt. I get the same message with all other .zip files.... is anyone also having the same problem?
ahhh! :) Thanks Robin!
My D60 came with version V109, so how do I update to V139 if this is the note for the installation:
Is V019 just a typo and should be V109? Since there are no other firmware versions named V019 to download... this is a bit confusing.
You can just download the version you want and copy it on the drive. Then insert it on the usb port of the soundbar. It should say update and the there are numbers going to 100 . At the end you can check your software version.
A mi me viene con la versión 133 y desconozco que cambios trae o si mejora.
Dudo en actualizar o no a 139 y si puedo desde mi versión
So which version and equalizer would you recommend for most of the movies?
I am getting quite frustrated at the moment and I know it will be my fault but....
I am downloading the update, I have now used 9 different USB sticks formatted as FAT32 and when I copy over the update and plug in to the D60 it reports no update found... I am current on the 81 software in one room but latest system that was delivered yesterday is on 142 out of the box...
What am I missing?
If you have left the file zipped and with it's original name ,then it's possibly because windows has formatted the usb drive as a Uefi startup drive.Windows 11 will do this.
Is the v142 already able to download here? Would try a new version. I’m current on 139
I bought my unit in June 2024 and had V130. From the website, this version is not listed. There only seems to be V109, V133 and V139.
My V130 was not spectacular and wanted to upgrade to V139 as suggested with correspondence with Ultimea team. Before I did the upgrade, I wanted to listen to the speakers to be able to compare sound with new version. While doing so, I checked the connection to surround speakers and unplugged and plugged back in. That seem to improve the sound of the back\surround speakers and created less distortion which in some way help the sound in general. Unplugging\plugging may help others too.
I then upgraded to V139 as per instructions and also checked version after install. All worked well and I now have more settings as expected. But most important, the sound is so much better and to my expectations based on reviews. V139 much better than V130 factory install. The Ultimea team was very responsive to my concerns and found solution with V139.
We need greater volume control for all speakers.
Centre - Dialogue channel (way too low) Needs independant volume control from L+R front speakers in bar.
Rears - Do not go low enough. They dominate the front speakers because they are closer to the listener. With update v139 I get zero sound on -3 & -2 is just too loud. I will keep trying to reinstall update in the hope it resolved this particular issue but I suspect I need a -5 setting.
Sub: Woolly at -1 & above
My D60 is easy on the eye, easy to install, love the minimal cable faff compared to my big rig. It's just sadly all let down by the volume control limitation.
From reading everyone else's comments, it is clear we all want the same solution: More increments down to zero & up to max volume. A lot of us find the dialogue unclear. When you can't hear Darth Vader breathing loudly or Princess Leia talking clearly in Star Wars, there's an obvious problem. I've tried different sound bar placements as there is an off vertical axis difference in sound but it doesn't cure the fundamental problem in that the dialogue channel is about 1 or 2 clicks too low compared to the L+R speakers in the bar.
Similarly, when listening to any music, the vocals are far too quiet compared to the music.
Separate control of the centre speaker is a must. Maybe a new remote is needed or a software solution that adds a dual function to the EQ buttons. Centre Volume + & Centre Volume -. When I say centre volume I am NOT talking about the L+R speakers in the bar. I'd be willing to buy a replacement remote if I had full control of the volume of the centre channel.
If you can sort out this issue in the software, you'll have yourself a winning product.
Room size for this unit: 15ft x 15ft
Location of rears: Same as Ultimea D60 product image below (directly behind sofa at sofa height)
Location of sub: Same as D60 product image (beside sofa)
Audio source: eARC (HDMI2) & Optical from LG OLED 55 BV6
I purchased my D60 in June, and it came with the original software V130. I noticed that the sound volume for EQ2 and EQ3 was quite low compared to EQ1, so I upgraded to V139. The upgrade noticeably improved overall EQ2 and EQ3 performance compared to V130. However, I've encountered an issue where the dialogue volume in some movies is quite weak. I'm not sure if this is due to the movies having low dialogue volume or if the soundbar's firmware needs improvement. Any thoughts on this?
Muy contento con mi D60, ¿cuando sacareis la APP para configurarla al gusto? Es una idea genial
Esiste un nuovo firmware 142 da scaricare? Si può regolare con l'app solo il volume del centrale soundbar? È possibile aggiungere n 2 altoparlanti L e R esterni per una configurazione tipo il nuovo D70? Grazie
Differenza v139 con v142?
Perdonami, dove lo hai visto il firmware con versione 142?
https://support.ultimea.com/hc/en-us/articles/34835469102361-Poseidon-D60-Customized-Software-V142
Grazie.
A leggere le note release sembra che hanno tolto solo il tono di connessione bluetooth, presente invece nella v139...
Thank you all for your attention to the software version. Please note that our software testers will further test the new version of the device's software and release the firmware version when it is confirmed to be perfect and compatible. It does not mean that every software update will bring about drastic changes. We understand that many users pursue the ultimate audio experience, and we are also working hard to provide more possibilities for different users. Additionally, the ULTIMEA App currently only supports the download and use of very few new models. More models are still under development.
In any case, thank you for your patience and support.
Thank you for this update, it appears to have installed correctly. Hopefully it will fix the voice issue,which has spoilt most films for me. That much that I was considering getting a different sound system. I will find out in the next couple of days.
Please sign in to leave a comment.