① Apollo P40 projector can be connected to an external speaker like a soundbar via Bluetooth.
Here are the instructions:
1. Turn on the projector and external Bluetooth speaker.
2. Make sure the speaker is in Bluetooth pairing mode.
3. Click "Settings“ or click “Bluetooth” on the home page of P40 - enter the ”Bluetooth Setting".
4. Enter the "Accessories-Add accessory" to connect the projector to your external speaker via Bluetooth.
Note:
If the connection is complete and there is no sound from Bluetooth:
1. Turn off Bluetooth, then re-open and pair.
2. Check if the soundbar and projector are set to silent mode problem, please turn the volume up.
3. Replace the sound bar product.
②Play Through External Sound Devices Via AUX Cable
1 Connect one end of the 3.5mm AUX cable to the AUX port on this projector.
2 Connect the other end of the 3.5mm AUX cable to the AUX port on headphones or external speakers.
3. Playback on the projector.
If you have any questions or ideas, please contact Ultimea customer support at support@ultimea.com for further assistance. We will service you ASAP
Comments
0 comments
Please sign in to leave a comment.