How to operate the Keystone Correction？🔥🔥🔥

1. Auto Keystone Correction

1.1 Please make sure the automatic keystone correction is turned on by selecting：
Settings-Projection image Settings-Horizontal Automatic Correction (on)

1.2 Keystone correction angle range is 20° left and right, 30° up and down

Note: It is supported vertically (up and down): 45°; Horizontal (left and right): 30°, please be aware that a larger angle will cause unclear focus.

2 Manual Keystone Correction

2.1 Four Point Keystone:

Settings-Projection image Settings-Four Point Keystone-Free adjustment by the directional buttons on the remote control：
A. Enter "Settings" and select "Projection Image Setting"
B. Turn off"Multidirectional Auto-Correction"
C. Select "Four Point Keystone" to perform manual screen keystone correction
D. Click the "OK" button to select. Switch the four points, and adjust through the direction keys
E. After finishing the adjustment, click the"Back" button to return to the page

NOTE: If the device does not remember the settings after restarting, please turn off the autofocus and auto-correction functions first

2.2 Horizon And Vector Keystone:

settings-Projection image Settings-Horizon Keystone/Vector Keystone/Reset

Please refer to the operation video for detailed guidance steps:

①New UI interface operation video：

② Old UI interface operation video：

Note：

If there is an error in correction, please restore the factory settings

If you have any questions or ideas, please contact Ultimea customer support at support@ultimea.com for further assistance. We will service you ASAP