Network Connection Failure on Poseidon E100 – How to Resolve

1. Ensure the Wi-Fi password is entered correctly and the router signal is stable.

2. Avoid connecting to a 5GHz network if the device only supports 2.4GHz.

3. Restart both the router and the projector, then try reconnecting.

4. Check if there is a firmware update available for the system and upgrade if needed.

5. Reset network settings or perform a factory reset and try connecting again.

If this issue persists, please contact Ultimea customer support at support@ultimea.com for further assistance. Please make sure to mention that you have tried the steps in the FAQ so that our agents do not ask you to repeat these steps.