How to pair the Nova S90 subwoofer ?🔥🔥🔥

The subwoofer has been paired with the soundbar in the factory. However, you may need to re-pair it if there is no sound coming from the subwoofer.

Manually Pair:

Step 1
Press and hold the “SUB PAIR” button on the remote control for 3 seconds, until the soundbar shows “ SUB” flashing in the front.
Step 2
Press and hold the “PAIR” button on the subwoofer for 5 seconds, until the white LED light is flashing. The subwoofer is paired successfully when the white LED light is solid on.

If manual pairing fails, re-plug the subwoofer, perform a factory reset, and then manually pair again.

Here is a link to the video instructions:

If the above steps do not successfully resolve the issue, please contact support@ultimea.com and we will actively assist you.