V143 is the latest version of Poseidon D60.
Must read before upgrading:
① If the sound quality of the factory version meets your requirements or the current factory version is V143, you don't need to upgrade the software version. (Switching versions multiple times may cause compatibility issues)
② Before upgrading this version, please make sure your factory software version is less than V143（Press and hold the button on the right side of "surround" for 5 seconds.）(Not suitable for V018/ V019 or T20/T019 or V45 with App control new version).
③ Please ensure that the soundbar and the subwoofer remain connected before upgrading. Otherwise, the software versions will be inconsistent, and the subwoofer will have no sound or will not work.
④ If the device crashes and cannot be turned on after the upgrade, please contact customer service to send a "recovery file", please get in touch with support@ultimea.com.
V143 improvements:
① Optimize EQ1/EQ2/EQ3 sound effects
② Improved mid-frequency for clearer sound
③ Enhance surround sound quality
Specific Method:
1. Copy the "update.zip" file to the USB flash drive.
Note:
① Use an empty USB flash drive, USB format: FAT32, 128GB or less capacity;
② The file doesn't need to be unzipped;
2. After the Soundbar is turned on, insert the USB flash drive into the USB port, WAITING will be displayed, and then it will automatically upgrade and the progress will be displayed. Automatically standby after the upgrade is completed.
3. Press and hold the button on the right side of "surround" for 5 seconds. If the display shows "V143, " the upgrade is successful.
If you have any questions after downloading, please feel free to contact us, and if you have any suggestions or ideas.
Please note:
This software version is only compatible with Poseidon D60 that do not support the Ultimea App.
For the 2025 new version Poseidon D60 that supports the App, please get the latest software version update in the Ultimea App.
Please do not download the wrong software, as doing so may cause the device to malfunction.
- update.zip5 MB
Comments
168 comments
It’s the same, thanks
_________
es lo mismo gracias
Any news? V143 has lost the surround sound, and the sound is very low. Support, can you please help us? Hey, any updates? The V143 has lost its surround sound, and the sound is super low. Support, can you help us out?
Hi Daniel Villa
I had the same problem. I went back to version 142 and for me it was ok.
Best regards
It looks like there will be no more updates. Just downgrade to v139/v142. They are releasing now new version of Poseidon D60 so seems that whole team is focused on new products. It's really funny that latest firmware which You can upgrade is bugged as hell and they are not even removing it from site : d Seriously disappointing, especially that somebody reads this topic from ultimea.
I've checked my version number for my P60 soundbar by holding down the surround button and it comes up with what looks like U133, or maybe V133.
What update should I install on this surround.
Hello everyone. I currently have the D60 and it had the same sound problem. By testing I have been able to improve the problem quite a bit by placing the rear satellites towards the ceiling from the height of the sofa, the sound in waves bounce off the ceiling and this makes a very good surround sound after the center I have placed some rubber supports so that they do not have vibrations with the furniture has improved a lot and if you can lean a little upwards it will improve the more because the sound also bounced off the ceiling. If you provide me with the diameters, it is true that when you connect the bar the equalizer seems unable to modify but the TV already recognizes the parameters, the version I have been able to test best is the V139.mu TV is a 5-year-old samsung podwis test q1 q2 q3 for trying not to lose anything sa
Como mi inglés no es muy bueno.
En resumen los satélites en paralelo mirando hacia el techo a la altura del asiento o sofá altavoz central con soporte de goma para evitar vibraciones con los muebles
Configurar ecualizador de la TV al conectar la barra no tendrás opción de remover pero la TV tendra la memoria de esos parámetros lo podéis hacer pidiendoselo a un IA haciendo foto de la TV ej: quiero que me des los parámetros para que el sonido vocal sea claro y lps efectos traseros agudos y envolvente y si el altavoz central lo podéis inclinar un poco hacia el techo mejor también depende del habitáculo de la sala
En los últimos días le quise dar una nueva oportunidad a la versión 143 y me di cuenta que todo está en como configuramos la salida de audio de nuestro TV, me explico, en su momento tenía el TV con la salida de Dolby Digital Plus y el sonido no era bueno especialmente con lo graves, por lo que decidí volver la la versión 139 ya con esta versión instalada configuré el TV en passthrough y todo funcionaba perfecto. Luego decidí volver a probar la versión 143 para verificar si realmente había diferencia y definitivamente la versión 143 y el TV en passthrough se escucha bastante bien, si bien es cierto los bajos no se escuchan permanentemente fuetes no se pierden por completo, pero si se escuchan fuerte cundo deben lo que quiere decir que la Poseidón D60 gestiona mejor el procesamiento del sonido y sí se disfruta mucho mas el contenido que estamos viendo, ya que, no se se llena la habitación de los bajos permanentemente, si no, que se escuchan fuerte solo cuando así debe de ser. Espero que esto sea de ayuda para alguien más para así poder disfrutar de nuestro sistema que a pesar del abandono de Ultimea sigue siendo un buen producto.
Hola, la versión v143 está rota independientemente de la configuración de la salida de la TV. Por los altavoces traseros se filtra sonido de los altavoces delanteros, por lo que se pierde completamente el efecto 5.1 que debería tener un sistema dolby 5.1.
Es correcto, haces un test de 5.1 y el parlante satélite suena en sonido delantero y trasero, cuando no debería. De esa forma es como un estéreo.
V143 is the same as V139 at this time. The download link isn’t working as it should.
I need V142, help me please
V143 is the same as V139 at this time. The download link isn’t working as it should.
I need V142, help me please
Habe gerade nach langen hin und her meine Poseidon D 60 mit softwareversion V143 upgegradet . Hatte noch die Werksversion drauf ....jetzt sind viel mehr Stufen da und feiner einzustellen ,auch die Lautstärke. Der Bass ist schwächer aber auf +6 langt er voll zu in Filmen und beim Musik hören . In der Werksversion 083 war er viel zu stark so das man Probleme bekam beim Einstellen.....alles in Allen ist es ok ☝️
Dear all, @ultimea support, are there news about new update? I think is important to setup the volume about the central channel!
Tried upgrading from v83 to v143 and it completely bricked my soundbar i need a recovery file emailed or posted ASAP.
There is no recovery file, you must do it again with the same v83 file
The v83 worked and upgraded me from v81 then I tried to go to v143 from v83 it started updating then only a singular dot appeared then when I tried unplugging and plugging it back it it’s been completely dead with no signs of life. I just tried putting v83 back on a flash drive but nothing has changed the soundbar appears to be completely off even when plugged in. Any and all help is appreciated, why keep a firmware that actively bricks people’s devices?
Soundbar is still bricked and there is no recovery file so stay away from v143 for anyone who likes a functioning speaker, using the old firmware did NOT work and it is showing absolutely no lights or signs of life.
Thank you for trying to help Dabb
Please sign in to leave a comment.