Improvement Point:
① Vocals are clearer
② The EQ display logic is updated
Upgrade Method:
1. Download and Copy the "update.zip" file in the attachment to a USB flash drive
Note:
①the USB flash drive is empty and has a capacity of less than 128GB
②you don't need to unzip the file, just copy it to a USB flash drive.
2. When the Soundbar is powered on, insert the USB flash drive into the USB port of the Soundbar, and then the Soundbar will upgrade automatically and display the progress from 1 to 100.
3. After the upgrade is completed, the Soundbar will automatically standby;
4. After the Soundbar is turned on, pls check the software, press and hold the "MUSIC" button on the remote control for 5 seconds, and then the display will show V98, which indicates that the upgrade has been successful.
Note:
If the sound quality of the factory version meets your requirements, we do not recommend switching software versions. If you have any questions, please contact support@ultimea.com
- update.zip6 MB
Comments
44 comments
Hello Stefano,
Yes, V98 is the latest and most comprehensively covered and improved version. It includes lowering the Bluetooth beep and volume, the same improvement points mentioned in V93 and T093.
Does V98 allow EQ adjustment? The HF and high mids are a bit down, & I cannot see if they are adjustable other than the movie, music & game presets.
Hello Mike Cooper,
V98 has increased the bass adjustment range to -2~2; you can adjust the Bass and EQ together to achieve a good audio effect.
The soundbar doesn't have other EQ modes and more self-customized EQ adjustment functions, it needs to be achieved by APP, and our product developers are planning to implement this function. But it will take some time. Please Stay tuned~
Thank you for your support and understanding.
If you have any other questions, please do not hesitate to contact us!
Hi JC, did you by any chance solve your issue following their advice? I am considering upgrading my software too but I'd like to make sure not to break the soundbar (again). Thanks!
How do I reduce or turn off the sound of bluetooth when connected.Hi dede,
Thank you for your comment, we will send you the customized software T11.2 to cancel the Bluetooth beep by email within 24 hours!
I have updated to T11.1 since then the sound bar keeps losing sound any appreciated
Hello Glynn Newey.
Have you encountered this problem with other versions of your soundbar?
Could you please try to restore the factory settings？
If there are still problems when other versions, could you please contact us and send us a video of the problem at support@ultimea.com？
We will analyze the problem and give you a solution.
If the problem occurs only with T11.1, we recommend you reinstall the soundbar to another software version.
Thank you!
Hello Mike Cooper,
Thank you for sharing.
We have established an APP research and development team, and the APP is expected to take 3-5 months to be released. At that time, we will give priority to inviting you to experience it.
Before there was an APP, we would try our best to meet our customers’ audio needs through customized software.
Your support and encouragement are our motivation to move forward!
I am unable to apply any updates. I download the zip file, but when transferring to a USB drive, once copied I receive the message 'Please insert the last disk of the Multi-Volume set and click OK to continue'. If I press OK, it just gives me the message again. I click cancel and the zip file appears to be on the USB drive, but the soundbar does not update when the USB is connected. It recognises the drive, but does not update.
Ciao. Mi fa un difetto quando è in modalità Music su alcuni canali tv si sente altissimo e invece quando cambio in altri canali ha un volume audio normale. Difetto che non fa in Game e Movie il volume audio è uguale su tutti i canali. Come posso risolvere? Versione V93
Answer #11535
1. Upgrade the version V98 software again (the software already downloaded in the USB flash disk does not need to be deleted, and can be upgraded directly).
2. After the software upgrade is completed, unplug the adapter for 5s and then turn on the device again.
If you need further assistance, please contact support@ultimea.com, and we will service you ASAP!
Hi Ultimea Support, thanks for your quick response and the explanation! Based on your Feedback I would like to add another proposal - I hope I don't annoy you with that :D
I think that there are two categories of buttons.
The first category consists of the 5 source buttons and the mute button. They should be protected by the "press twice" mechanism (wake up + change setting) since they could break the experience (e.g. watching a movie) when accidentally tapped.
The second category consists of:
When either of these buttons is pressed I don't need (nor want) to look at the soundbar to see the changes I made as
That being sad I still do understand that people could be running into some issues with these changes. Maybe you could add this as a hidden feature or by pressing the "LED"-button for a longer period.
Anyways I want to mention that it is great having a direct contact to you guys and the possibility of sharing ideas!
Best regards
AP
Is there a solution for the soundbar not accepting the update
Please sign in to leave a comment.