Main Improvement Points:
①Modify the range of Bass adjustment to 6-6
①Improve EQ sound effects
③Reduce background noise and improve vocal clarity.
④Modify the range of Volume adjustment to 0-100.
⑤Remove the Bluetooth notification sound
Note: The volume needs to be set in equal proportion to the factory version of the software.
Volume can be quickly increased or decreased by long press, it takes about 8s to go from 0-100 (please short press 2 times first, then long press it )
Specific Method:
1. Copy the "update.zip" file to the USB flash drive.
Note:
① Use an empty USB flash drive, USB format: FAT32, 128GB or less capacity;
② The file doesn't need to unzip;
2. After the Soundbar is turned on, insert the USB flash drive into the USB port, WAITING will be displayed, and then it will automatically upgrade and the progress will be displayed from 0-100. Automatically standby after the upgrade is completed.
3. Press and hold the button on the right of the "Dolby ATMOS" (or"OPT") for 5 seconds. If the display shows "V143", it means the upgrade is successful.
If you have any questions after downloading, please feel free to contact us, and if you have any suggestions or ideas
Also, you could leave a message in the comments below, we will pay attention and reply to your message.
- update.zip5 MB
Comments
19 comments
"3. Press and hold the button on the right side of "Dolby ATMOS" for 5 seconds. If the display shows "V143", it means the upgrade is successful".
On my Nova S70, you have to hold down the "OPT" button on the remote control for 5 seconds to view the firmware version and other information
Hello Domenico Buono,
Thank you for reaching out to us with your feedback. We appreciate your input and are constantly working to improve our product information. We have updated our article to reflect the correct method for checking the firmware version on your Nova S70. Please let us know if you have any further questions or concerns. We value your business and strive to provide the best possible customer experience.
Since installing this firmware the Dolby Atmos 'volume' no longer functions on the remote. There's no feedback on the soundbar that anything is changing. Holding the right side of the button down does show the firmware info and the red led flashes on the remote.
Hello Karl Scott,
Thank you for your feedback. You mentioned that after installing the firmware, the Dolby Atmos volume control function on the remote control no longer works and there is no feedback from the soundbar. When pressing the right side of the button, the firmware information is displayed normally and the red light on the remote control is also flashing.
We recommend that you try resetting the soundbar first or confirm whether the firmware version is installed correctly. If the problem is still not solved, please contact support@ultimea.com and we will provide you with further assistance.
Hello,
Since I have installed the new software my Movie and Dialog Equalizer settings are unusable. I can hear music and sound effects but voices are basically mute. When I change to music then it only comes out of right speaker not center or top Atmos speakers regardless of the input type and video/audio input this wasn't an issue with last upgrade. Already tired resetting and redoing the upgrade and still issues with Movie and Dialog as well as music equalizer settings. I think my unit is defective, I have been tinkering with it for a few days and no luck fixing my TVs speakers now are more powerful. Need help!
Kyle
Hello team, the bass could be stronger and the highs not so tinny, it sounds like the voices are in the bathroom. Otherwise I'm happy. The Dolly Atmos sound is amazingly good. It would be nice if it sounded like that in normal mode too. I had dropouts on an older 4k Samsung TV (GU55TU8379UXZG) with the HDMI and HDMIe(Arc) signal, so that the soundbar was not usable with HDMI on this TV. Strangely enough, the soundbar works great on my new Samsung QLed. Thanks for reading.
Hi Guys. I got my Nova s70 from Amazon some days ago and sadly I can't use it. The main issue is the voices are in the bathroom and I can't fix it using any setting. Can be because it's a old Samsung 4k tv? The model is UN50MU6100GCZB. Thanks.
Every time i download the V143 or V139 update file i get a "file corrupt" error and the zip file wont open. Any ideas ?
i Hope you will update the firmware and fix to resolve all this issues nova s70
pls. help there is no sound from EARC
hope you add more volume in atmos effects and bass volume
when will be an firmware update improving atmos sound effect add volume to atmos and bass subwoofer
If i update to this version and then i don't want it can i downgrade to my old one?
If you can, just download the version you want and load it. I did.
And if i don't like it can i downgrade to the firmware i had?
Yes
Could you please tell me which firmware is the best for movies and what preset of equaliser.
Tell me also the volumes of each in order to enjoy movies at its best
The adjustment is in MOV of movies and the bass and volume to your liking, try it out
Please sign in to leave a comment.