How to connect the PC？

Bluetooth connection to PC:

Switch Soundbar to BT mode, open the Bluetooth connection of PC, search for the corresponding BT hotspot of the soundbar to mate, and Bluetooth connection successfully when hearing a voice prompt "connected”/”Dingdon"

AUX connection to PC:

1.Please use the AUX cable (3.5mm to 3.5mm audio cable) to connect the soundbar AUX interface and PC AUX OUT/Headphones interface

2.Ensure that the output mode on the soundbar is AUX mode.

3.Open the sound icon in the bottom right corner of the PC, and then click on the headphones icon. The sound output selection is: Headphones (Realtek Audio）

4.Make sure the PC and Soundbar volume are opened

Note:

1: When in AUX mode, if you need to switch to another output mode, please remember to unplug the AUX cable from two devices.
2: For desktop computers, there is no sound when connecting AUX- only noise:
A: Try changing an AUX cable
B: Switching to a laptop, or replacing the headphone interface at the back of the host

If this issue persists, please contact Ultimea customer support at support@ultimea.com for further assistance. Please make sure to mention that you have tried the steps in the FAQ so that our agents do not ask you to repeat these steps