How to Pair the Subwoofer and Surround speakers with the Skywave F40 Air Soundbar?

The subwoofer and surround speakers have been paired with the soundbar by factory.

If the connection is lost, please follow these steps:

Press and hold the "Xupmix" button on the remote control for 5 seconds until "PAIR" starts flashing slowly on the main soundbar display.

Press and hold the pairing button on the back of each disconnected speaker for 5 seconds until its white indicator light starts flashing rapidly.

Wait for the speakers to connect. A solid white indicator light indicates that the connection is successful. Once the subwoofer and both surround speakers are successfully connected, "PAIR" will remain displayed on the main soundbar for 5 seconds, then the display will return to the current input source.

If the pairing is still unsuccessful, please complete the pairing process within 5 minutes. If the pairing times out, repeat the manual pairing steps above. If the speaker indicator light has turned off, briefly press the button on the back of the speaker to wake it up, or reconnect it to power and try again.

Note: During the re-pairing process, the subwoofer or surround speakers that are already connected may temporarily stop producing sound. This is normal during pairing.

If the subwoofer and surround speakers still have problems, please contact customer service at support@ultimea.com