How to set up 3D Mode on the Thor T60 Laser TV🔥🔥🔥🔥

To enjoy 3D content on your Thor T60 projector, it's important to correctly configure the 3D mode. Please follow the steps below to ensure your device is properly set up when using the HDMI input.

Steps to Set Up 3D Mode on Thor T60:

1. Switch to HDMI Input:
Ensure your 3D source is connected via HDMI and select the correct HDMI input on the projector.

2. Open Settings:
Press the Menu button on the remote while on the HDMI input.

3. Enable 3D Mode:
Go to 3D Settings and choose the correct 3D format (e.g., Side-by-Side or Top-and-Bottom). Note that this setting only works under the HDMI input, not from the home screen.

For a quick video tutorial, click here：

If you're still having trouble getting 3D to work, try the following troubleshooting steps:

1. Ensure 3D Mode is Enabled:

   • Double-check that 3D mode has been correctly enabled by following the above setup guide.

2. Use the Correct 3D Glasses:

   • If you're using 3D glasses, make sure they are properly activated. Some 3D glasses have an on/off switch that must be enabled for proper 3D viewing.

3. Test 3D Playback in Other Apps:

   • Try playing 3D content from other applications like YouTube or Vudu to rule out compatibility issues with specific apps (e.g., Fandango, Disney+).

4. Record and Share a Video of the Issue:

   • If the problem persists, please record a video of the issue and contact our customer service team via email. This will help us analyze the problem and provide a more accurate solution.