A Step-by-step Guide:
1. Open and enter Android TV.
2. Select the “Network & Intenet”--Choose the target Wi-Fi network and enter the correct password.
3. Click "Connect" and wait for the connection to be established.
4. Common WiFi connection issues:
① WiFi network signal issue:
Reason: The WiFi network signal is weak or unstable, causing the projector to be unable to connect stably.
Resolvent:
-Try setting your phone as a hotspot and setting a simple password to see if the projector can connect successfully. If it can be connected, it may be the original WiFi network
For signal issues, it is recommended to replace the router with a stronger signal.
- Ensure that the distance between the projector and the router is appropriate, avoiding being too far away or obstructed by obstacles.
② Router configuration issue:
Reason:
-The channel settings of the router may be inappropriate, leading to signal interference.
-The name (SSID) or password of the router is complex, and the projector cannot recognize or connect to it.
Resolvent:
-Change the channel settings of the router. It is recommended to set the channel to 11 or below and set it to a fixed channel instead of automatic.
Simplify the name and password of the router by using simple numbers or English combinations.
③ Router malfunction:
Reason: The router runs unstably or malfunctions, affecting the transmission and reception of WiFi signals.
Resolvent:
-Restart the router and see if it can restore a normal connection.
-If restarting is ineffective, it is recommended to restore the router to factory settings and then reset the WiFi network.
Summary of Solutions:
- Ensure that the WiFi network signal is stable and strong enough
- Check and adjust the settings of the router, including channel, name, and password.
- Place the projector and router in appropriate locations to avoid interference and obstacles.
- Restart the projector and router, and attempt to restore factory settings.
- Update the firmware and software of the projector to the latest version.
- Check and adjust network security settings, such as MAC address filtering and firewall settings.
If the above methods are ineffective, please contact support@ultimea.com, and we will service you ASAP!
Comments
0 comments
Please sign in to leave a comment.