How to connect your Phone or other Bluetooth device on Poseidon E40 via the Bluetooth？🔥🔥

Poseidon E40 projector can be connected to an external speaker like a soundbar via Bluetooth. Here are the instructions:
1. Turn on the Bluetooth speaker.
2. Make sure the speaker is in Bluetooth pairing mode.
3. On the Android TV interface, select [Settings] -> [Remotes & Accessories] -> [Add accessory], search for Bluetooth device and click pair.

Note:
The Bluetooth connection must be established inside Android TV.

Bluetooth Speaker Mode:  Press the projection shortcut button  to enter the homepage of the projector, select [Bluetooth Speaker] in the carousel menu, and operate according to the prompts.

Troubleshooting Guide for Projector Bluetooth Connection Issues with Phone or Bluetooth Speaker (Disconnection or Unable to Find ID)

Unable to Find ID

1. Check Compatibility

   • Ensure that the Bluetooth versions of the projector and the target device (phone or Bluetooth speaker) are compatible. ( Projector Bluetooth version: Incompatible Bluetooth versions may cause connection issues.
   • Replace the external speaker product.

2. Restore Factory Settings

   • If the devices are compatible but still unable to find the ID, try restoring the Bluetooth settings to factory defaults. Here are the steps:
     1. Open the projector's settings menu and find the restore factory options.
     2. Select the option to restore factory settings.
     3. Perform a similar factory reset on the target device (phone or Bluetooth speaker).

3. Wait in Bluetooth Pairing Mode

   • During the Bluetooth pairing process, it may take a few minutes to find the ID. Be patient and wait 1-3 minutes in the Bluetooth pairing interface, ensuring the devices are in discoverable mode.
   • If the ID still cannot be found, try turning Bluetooth off and on again, then attempt to search once more.

Intermittent Disconnection

1. Check for Router Interference

   • Wireless signal interference from routers or other wireless devices can cause intermittent Bluetooth disconnections. Ensure there are no routers or other wireless devices near the projector and target device.
   • Try moving the projector and target device away from potential interference sources.

2. Reduce Wireless Interference

   • Avoid using microwave ovens, cordless phones, and other devices that may interfere with Bluetooth signals near the Bluetooth devices.
   • Adjust the placement of the projector and target device to ensure there are no obstacles between them, reducing signal blockage.

3. Turn Off and Re-open Bluetooth

   • Turn off Bluetooth on both the projector and the target device. Wait a few seconds, then turn Bluetooth back on and attempt to pair the devices again.