Solo B30 Pro Customized Software-V132

If the sound quality of the original version does not meet your expectations, please try upgrading to V132.

Software Improvements:

1. Increased overall volume.
2. Adjusted high, mid, and low frequencies for improved vocal clarity.

Solo B30 Pro Firmware Upgrade via USB:

1. Place the "ota.bin" file into a USB drive. 【Please download it from the attachment or click here: ota.bin】
2. Insert the USB drive into the soundbar while it is powered on. The device’s indicator light will flash purple, indicating the upgrade process has started. (If the light doesn’t flash purple, try reinserting the USB drive.)
3. After 5 flashes of the purple light, the upgrade will be complete. The soundbar will automatically power off, and you need to turn it on again.

Solo B30 Pro Firmware Upgrade Via App

We have pushed the V132 firmware to you through the App, please enter to update it.

How to Confirm the Firmware Upgrade:

1. Unplug the USB drive inserted, and switch the soundbar to the USB channel using the remote control.
2. Press and hold the Music button on the remote for over 5 seconds. The upgrade was successful if you hear the number "32" announced!

We hope this article has been helpful to you. Please feel free to contact support@ultimea.com!

If you have any suggestions, please don't hesitate to share them with us or leave a comment below. We will actively pay attention and improve them. Many thanks for your support and understanding.

• ota.bin900 KB