What to Do If the Apollo P60 Projector Remote Control Isn’t Working or If You Experience Interference🔥🔥

If the remote control of the projector does not work or is not sensitive, please try to below steps:
① Make sure the remote control light is on, then replace the batteries.
②In the projector off state (the power button shows red light), use the remote control to point at the projector device, long press the ”menu“ button on the remote control for more than 10s until the projector is switched on and there is a screen (the power button shows blue light), indicating that the binding is successful.

Note:

1. If the remote control light still does not light up or is not sensitive after replacing the batteries, or the remote control light is on but still does not work after pairing, then you need to replace the remote control.

2. If the pairing or blinding is incorrect, please switch off the machine and try again.

If you are still having issues with your remote, please contact Ultimea customer support at support@ultimea.com. Please mention that you tried these steps to help us find a solution for you faster.