Poseidon M3T Wireless Subwoofer and Wired 2*Surround Speakers Connection? 🔥🔥🔥🔥

Tips: If there is no sound or abnormal sound after connecting and pairing the subwoofer correctly, you can try to unplug the subwoofer and restart it.

CONNECT TO SUBWOOFER AND SURROUND SPEAKERS

1. Use the 6m RCA-RCA cables to connect the subwoofer and surround speakers, please pay attention to matching the same color interfaces on the surround speakers with the corresponding ones on the subwoofer and place the surround speakers accordingly.

2. Use a power cable to connect your subwoofer and power port.

PAIRING SUBWOOFER

The subwoofer has been paired with the soundbar by ULTIMEA.

However, you may need to re-pair the soundbar and subwoofer if there is no sound coming from the subwoofer.

It is recommended that the remote control be paired close to the LED display of the main sound bar and that the subwoofer be placed next to the main soundbar.

Subwoofer Pairing Method:

Step 1: Press and hold the "BASS" button on the remote control for 5 seconds, the display will show "SUb" flashing.
Step 2: Press and hold the ON/ OFF button on the subwoofer for seconds, the white LED will be fast flashing. The white LED will always be on when the subwoofer is paired successfully.

Subwoofer abnormal working problem:

1. It is recommended to place the subwoofer on the ground for use.

2. Please do not use external objects to block the soundbar and subwoofer horn

3. To increase the subwoofer effect:

A: Turn up the volume

B: Press BASS： BS 1 or SR 1

C: Try it out with a heavy bass song and turn the sound to the maximum. then put your hand close to the subwoofer.  Check for vibration.

Note:
1. For a better listening experience, please choose one of the two placement options shown in the illustration above based on your home eenvironment.
2. The soundbar and surround speakers should be placed at or near ear level.