Search

Nova S90 Customized Software-V190

Ultimea Support
Ultimea Support

Main Improvement Points:
① Enhanced Clarity for Surround Sound.

② Add a new DAP On/Off Toggle.

  • Press and hold the AUX button (5 seconds) to disable DAP.
  • Hold again (5 seconds) to re-enable DAP.

Upgrade Method:

1. Download and copy the "update.zip" file in the attachment to a USB flash drive
Note:
① Use an empty USB flash drive, USB format: FAT32, 128GB or less capacity;
② The file doesn't need to be unzipped;

2. When the Soundbar is powered on, insert the USB flash drive into the USB port of the Soundbar, and then the Soundbar will upgrade automatically and display the progress from 1 to 100.

3. After the upgrade is completed, the Soundbar will automatically stand by;
4. After the Soundbar is turned on, pls check the software, press and hold the button on the "USB REPEAT" for 10 seconds. If the display shows "MCU-V190", it means the upgrade is successful.

Note:

If the sound quality of the factory version meets your requirements, we do not recommend switching software versions. If you have any questions, please contact support@ultimea.com

Was this article helpful?

1 out of 2 found this helpful

Have more questions? Submit a request

Comments

4 comments

Date Votes
  • Comment author
    Justin

    I reformatted my USB drive, copied the update.zip file to the USB drive, entered it into the USB port on the back of the S90 and the LED displays “USB” but it does not install. It sits at USB until it fades out. On my previous S80 model, it would go from 1 - 100%. Any ideas?

    0
  • Comment author
    Stephane

    Il faut formaté la clé USB en fat32 pour que la s90 nova puisse lire la mise à jour.
    Cordialement.

    0
  • Comment author
    Already ENTERED!
    • Edited

    It gets to 80 and freezes forever. Then, when I restart the S90, "UPGRADE FAILED" keeps scrolling across the screen, blocking out anything I actually need to see on the display like which input I've selected, etc. 

    0
  • Comment author
    James

    Installed went from 1-100 went into standby mode. I turned it back ON.

    My display showed “UPGRADE SUCCESSFUL” instead of “MCU-V190”

    Your site says:
    “After the Soundbar is turned on, pls check the software, press and hold the button on the "USB REPEAT" for 10 seconds. If the display shows "MCU-V190", it means the upgrade is successful.

    0

Please sign in to leave a comment.