Multiple Connection Methods for Poseidon M60 Soundbar🔥🔥🔥🔥🔥

There are three ways to connection for TV 

Recommend connection: HDMI eARC＞OPT＞Bluetooth

Note: You can't switch the output mode of the soundbar when plugging in the device. Please press the “Power” button to turn on the soundbar and wait until "----" appears on the screen of the soundbar before switching the mode.

一. HDMI eARC Connection：

1. Check if the TV and soundbar are connected to the port that is marked "ARC" or"eARC" ("HDMI IN” does not support this).

2. Connect one end of the HDMI cable to the HDMI (ARC/eARC) port on your TV.

3. Connect the other end to the HDMI (eARC) port on your soundbar.

4. Plug the charger’s connector into the DC IN port, then connect the power supply to the outlet.

5. Press the ARC button on the remote control and check the LED shows eARC on the soundbar.

6. Set the Sound Output to “Receiver (HDMI)” on your TV.

二.Optical Connection:

1. Find a digital optical cable (not included in the package). Remove the protective caps from both ends of the cable.

2. Insert one end of the optical cable into your TV’s Optical Out port.

3. Align the other end of the cable with the OPTICAL IN port on the back of the soundbar.

4. Finally, connect the soundbar to the power supply. Then press the "OPT" button on the remote and check that the LED indicator on the soundbar matches the optical input mode as shown. After that, select "Optical" as the audio output on your TV.

三.Bluetooth connection ：

1. Press the "BT" button on the remote control and check that the LED indicator on the soundbar matches the Bluetooth mode shown in the picture.

2 . Then turn on your phone's Biuetooth search and connect with device Poseidon M60.