How to Connect a Subwoofer and Surround Speakers to the Aura A30 Soundbar？🔥🔥🔥🔥

Subwoofer connection:

The subwoofer and soundbar are connected via a wired connection. Simply connect the wire from the back of the subwoofer to the SUB OUT port on the Soundbar.

Subwoofer abnormal working problem:

1. It is recommended to place the subwoofer on the ground for use.

2. Please do not use external objects to block the soundbar and subwoofer horn.

3. To increase the subwoofer effect:

A: Turn up the volume

B: Press BASS： BS 1 or SR 1

C: Try it out with a heavy bass song and turn the sound to the maximum. then put your hand close to the subwoofer. Check for vibration.

Surround speaker pair method:

1. Connect the "rear left surround speaker" [SL] and rear "right surround speaker"[SR] with the surround cable,

2. Connect the "rear right surround speaker" [SR] to the power supply.

3. When the Soundbar is powered on, the surround speakers will automatically pair with the Soundbar. When the indicator light on the rear right surround speaker is steady, it indicates successful pairing.

Manual pairing:

1. Press and hold the "SURROUND" button on the remote control for 5 seconds. The display screen will show "SUR" and flash.

2. Press and hold the PAIR button on the right surround speaker for 5 seconds. The indicator light will flash quickly. After successful pairing, the indicator light will remain steady.

Special note:

If manual pairing fails, try restoring the factory settings: Power on, and long press the remote "DEVICE RESET" 5S to initialize the device. The soundbar LED will show the “RSET”.

Then move the surround speakers close to the soundbar and perform manual pairing again to resolve this issue（Less than 50cm distance)

Note:
1. For a better listening experience, lay out the entire system as shown in the picture below.
2. The soundbar and surround speakers should be placed at or near ear level.