Poseidon D60 Customized Software-V133

Ultimea
Ultimea

V133 is the latest version after V132.

Note: 

① If the sound quality of the factory version meets your requirements, we do not recommend upgrading the software version

Before upgrading this version, please make sure your factory software version is V81 or V83 or higher (Not suitable for V018/ V019 or T20/T019), if you are not sure, please contact support@ultimea.com

 

V133 installation download: update.zip

The difference between it and V132 is:

① Optimize EQ1/EQ2/EQ3 sound effects
② Improved mid-frequency for clearer sound
Other improvements are consistent with V132

Specific Method:

1. Copy the "update.zip" file to the USB flash drive.

Note:
Use an empty USB flash drive, USB format: FAT32, 128GB or less capacity;
The file doesn't need to unzip;

2. After the Soundbar is turned on, insert the USB flash drive into the USB port, WAITING will be displayed, and then it will automatically upgrade and the progress will be displayed. Automatically standby after the upgrade is completed. 
3. Press and hold the button on the right side of "surround" for 5 seconds. If the display shows "V133", it means the upgrade is successful.

If you have any questions after downloading, please feel free to contact us, and if you have any suggestions or ideas

Also, you could leave a message in the comments below, we will pay attention and reply to your message.

Was this article helpful?

2 out of 2 found this helpful

Have more questions? Submit a request

Comments

14 comments

  • Comment author
    Scott Weaver
    • Edited

    Follow up to comment under v131 thread after receiving pre-release v132 version... My first attempt to install v132 appeared to install correctly (USB detected, and progress ticked up to 100), but something was not right as the surround sound was strangely disabled regardless of what level I set it at. However, I downloaded the version and installed a second time, and everything is working great now. PS love the idea of an app to have visibility and control of the equalizer settings. Thanks much for the work on this.

    3
  • Comment author
    Ultimea

    Hi Scott Weaver,
    Thank you for sharing.
    It's an honor to see that this software works to your satisfaction.
    If you have any questions, you can contact us anytime!💟

    0
  • Comment author
    Justus M.

    As for Scott, same happened to me. First install, ticket up to 100 but bass and surround no longer worked. (Update from version v83) But, after I installed a second time it then worked and I like the update! I do think it is a little annoying to switch between 13 bass settings, 7 as for the surround would probably do - but it's not too bad. I like the update to EQ3 as well, but for now am waiting for the app, as that would be the ultimate improvement and probably selling point for many potential buyers!

    0
  • Comment author
    Ultimea

    Hello Justus M..
    Thank you for your feedback.
    We're glad to see that the issue was resolved with the second update, and we'll keep an eye on it to see if it's still an issue.
    Additionally, most customers have commented that the adjustable range of bass and surround is not enough, so we've added multiple levels to meet more customer needs.
    If this bothers you, the V109 version will have a lower adjustment range. Would you be willing to try the installation?
    The APP development is complicated and will take a longer time to realize.
    At this stage, we can only try to meet everyone's audio preferences by customizing the software. We will try our best to do so.

    0
  • Comment author
    Justus M.
    • Edited

    After using it for a day, I actually like the 13 levels of bass - so I ill stay with this version for now. Only thing I would enjoy, would be to individually set the bass and surround for the EQ1/2/3 and for the mode to remember it. I enjoy a lot of Bass when watching movies in EQ1, but have no need for it when watching tv/shows in EQ2. So now, every time I watch a movie I have to increase Bass/surround, and when I watch a show decrease them again - if I could just set higher bass/surround to EQ1, and lower Bass/surround to EQ2, and for the EQ mode to remember my bass/surround setting.. That would be the only improvement I would enjoy, allthough I understand if there is some hardware restrictions. Thanks again, J.

    0
  • Comment author
    Robin

    We have the issues in movies that the dialogues are very quiet if there is soundtrack that ist been played trough the surround speakers. Any ideas how to fix this. Watched dune last night and alle we heard most of the time was the soundtrack out of the speakers. No explosions or so. Watched with Atmos enabled

    0
  • Comment author
    Ultimea

    Hello Justus M.
    Your suggestion is very well. Thank you so much!
    I am sorry to say that we are not able to implement this intelligent memorization feature at the moment.
    Please believe that we will try to do it. 

    0
  • Comment author
    Stefan Mitran

    Hi,
    I just updated to 133 going through all updates from 83 as I was looking for a bit more bass. V109 was great just what I needed however, dialog on youtube on version 109 eq1 seemed to have volumes up and downs randomly and sometimes struggling to hear. I moved to 132 and 133 now and the problem I had on 109 is resolved, I have more bass levels however all presets eq1 ,2 and 3 have muffled sound without much highs and mids like eq2 and 3 used to have on versions 83 and 109.
    I find version 83 being best with eq1 but will need few more levels on surround and bass.
    Is that something you will likely be implementing in the future?
    Something like Version 133 wit eq1 from version 83 would be ideal.
    Thank you!

    0
  • Comment author
    Ultimea

    Hello everyone,
    We have released the new Poseidon D60 software, which is designed to improve the muffled sound problem of the V133 that most of our customers have previously mentioned.
    If you are interested, please try to install the new software V139

     
    After the test, could you please give us feedback on the result? If you have any relevant suggestions, please feel free to share them here.
    Thank you all, and we hope this software will be enjoyed by all as well.
    0
  • Comment author
    José Callixto

    Hello Ultimea and everyone!
    After trying the V132 and V133 versions, I went back to the V109, as I then shared.
    I tried yesterday and today exhaustively the V139... and I think it's the first time I'm not going back to the V109. I honestly like this version, the sound seems clear to me and without any problem.
    The settings are personal and subjective, but the one that seems best to me for most sound experiences is with the EQ2, SR2 and BS4.
    Fully satisfied with the system, thank you!

    0
  • Comment author
    Stefan Mitran

    Hi all,

    After trying all the versions few times now, I can confirm the new version V139 is by far the best one of them. EQ1, SR3 and BS4 work best for me. I would still like a bit more highs and mids for movies though.
    I would keep the current EQ3 for music as it works great and add a bit more highs and mids to EQ1 for movies.

    Thank you!

    0
  • Comment author
    Eric Simon

    @Ultimea Unfortunately after testing V139, V109 is still superior. I don't notice much improvement over V133. Voices still aren't clear and there's way too much reverb/echo.

    0
  • Comment author
    Robin

    Testet now v139 yesterday evening with lord of the rings. Much better dialogue and enhanced. Bass is still to much sometime even at -4 but i think we won’t get around this

    0
  • Comment author
    pappicio
    • Edited

    tryed all version, for now, for sub and rear speaker position on my room, the best is v133, 109 is louder on rear speakers, and 139 is not real clear.

    I think all depends of sub and rear speaker position, if for me the best is using V133 firmware, and for other is use 109, or 139, the real solution would be the ability to set separately front speaker/back speakers volume, and setted them, moving up/down master volume, they respect the own volume ratio, or maybe you'll post other 1000 different firmwares for the future to satisfy all of us.

    0

Please sign in to leave a comment.