Search

Poseidon D50 Unable to power on?🔥🔥🔥

Ultimea
Ultimea

After you have connected the power cord, please press the Power button and wait until "----" appears on the screen of the soundbar before switching the mode.【ARC/BT/OPT】

Please confirm whether the LED of the soundbar is light on:
1. The LED is not on, please confirm if the power adapter is properly connected. If there is still no light, it may be an adapter failure. Please contact customer service to replace the adapter.
2. The LED is on, but only "-" or "----" is displayed on the LED screen and won't power on, it may be that static electricity caused by rising temperature causes the product to get stuck when starting up.

① Try to unplug the subwoofer power cable, and wait 30 minutes
② Unplug the soundbar power cord, and wait 30 minutes, then plug it back in and try to turn it on.

This is an effective method shared by other customers. we hope it can help everyone solve the problem:
1. Make sure to disconnect the soundbar completely from all sources, Do not connect any cables to the soundbar. (all sound input needs to be removed and power disconnected from the back of the soundbar)

2. Unplug the subwoofer power cable

3. Leave everything unplugged and off for a minimum of 4 hours.

4. After four hours plug back in the sound input (HDMI ARC, Optical, or AUX).

5. Next plug the sound bar into the power to try to turn on the soundbar.

Note:
If the device crashes and cannot be turned on or does not work when installing new software(V43/V49), please contact our customer service department and we will provide you with a recovery file to solve the problem.

If this issue persists, please contact Ultimea customer support at support@ultimea.com for further assistance. We will service you ASAP!

 

 

 

Was this article helpful?

6 out of 8 found this helpful

Have more questions? Submit a request

Comments

3 comments

Date Votes
  • Comment author
    Ultimea

    Hi everyone,
    Feel free to share your suggestions and methods of use.
    This will help other customers to solve their problems, and we will actively feedback your suggestions and problems to the quality department, product department, and suppliers to further improve the quality and design of the products.
    We are very grateful!

    1
  • Comment author
    Justin

    Hi Everyone,

    To whom ever bumps into this possible problem. May I suggest the following , which ended up fixing this issue for me.

    1. Make sure to disconnect the sound bar completely from all sources, nothing should be hooked up to the sound bar. (all sound input need to be removed and power disconnected from the back of the bar)

    2. Turn off the bass speaker.

    3. Leave everything unplugged and off for a minimum of four hours.

    4. After the four hours plug back in the sound input (HDMI ARC, or  Optical, or AUX)

    5. Next plug in the sound bar into the power source.

    For me once I did these steps it fixed my issue I was having.

    I hope these steps help and enjoy your excellent surround sound bar and speakers. Thank you. 

    0
  • Comment author
    Ultimea

    Dear Justin,
    Thank you so much for sharing.
    Different devices may have different power outage durations to resolve this issue. Thank you for your suggestion. I will add the steps you gave to our troubleshooting, hoping to better help other customers.
    Of course, we are also looking into the cause of this issue and working to improve the product.
    Thank you again for your support and understanding!

    0

Please sign in to leave a comment.