Note:
① Before upgrading this version, please make sure your factory software version is V018 or V019 or T20, if you are not sure, please contact support@ultimea.com
② If the sound quality of the factory version meets your requirements, we do not recommend switching software versionsThe main improvements in this software version are as follows:
T019 adds a BASS 2 level and has a total of 5 levels of bass volume adjustment. （BASS level：-2, -1, 0, 1, 2）
Upgrade method:
1. Download the Bin file in the root directory of the USB flash drive;
Note:
① Use an empty USB flash drive, USB format: FAT32, 128GB or less capacity;
② The file name must be spupdate.bin;
2. Insert the U disk, automatically switch to the USB source, and long press the "SURROUND" left button, as shown in the right picture button 1;
3. After the update is completed, it will automatically restart;
4. Press and hold the right side of the "SURROUND" button, as shown in figure button 2, version number T019, indicating that the upgrade is successful;
- spupdate.bin4 MB
Comments
17 comments
do u have sound issues too nick? like your left and right sound more quiet compaired to the rest and on eq 3 dose your rear speakers still work and dose -2 turn off your subwoofer?
I think it's intentional that the rear speakers are off at -2. When you listen to music and have EQ 1 or 2 on, I strangely hear almost nothing on the rear speakers, even at the highest level. But if you turn on a film or series, it's normal and you also have sound at the back on EQ 1 or 2. I tested it with the trailer for the film Reptil on Netflix. In summary: EQ 1 and 2 don't really work with the rear speakers when playing music, but they do when playing a film, which is strange. According to the operating instructions, eq 3 is supposed to be for music.Answer #8280
Each of our EQ modes defaults to Surround Level and Bass Level. if it doesn't match your audio preferences, you can adjust it yourself. EQ and Bass can be set based on your audio needs. EQ 3 is used to be for music.
If this issue persists, please contact Ultimea customer support at support@ultimea.com for further assistance. We will service you ASAP!
Answer #8281
The surround speakers have four volume levels: SR-2, SR-1, SR 0, and SR 1, with the following functions.
SR-2: Turns off the surround sound;
SR-1: Reduces the surround volume level (based on SR 0); SR-0: Default surround volume level; SR-1: Default surround volume level; SR-1: Default surround volume level.
SR-0: Default surround volume level; SR 1: Enhanced surround volume level.
SR 1: Enhances the surround volume level (based on SR 0).
For further solutions, we will contact you by email.
Hi Ultimea,
Please i'm currently on T019 and i can see that V132 has more improvements on the bass and surround levels. I would like this for my speaker. Please can i change software versions??
Hello jehn,
Sorry, your factory version cannot be updated to V132. V132 is only suitable for the factory version V81/V83.
T019 is the latest upgrade software for factory versions V018 or V019.
Please, would it be possible to get the features of V132 for my version?
Hi jehn，
We confirm that your current version T019 cannot download V132. If you require further assistance, please contact support@ultimea.com.
Please how soon will the mobile app be released???
Does T019 have the same features as v132? if not when will the T version get the same features?
Hello jehn&Chris Waites,
Thank you for your messages.
T019 cannot be upgraded to V132. We have provided you with a solution via email, please don’t worry~
Hallo,
Die Software T019 bringt noch nicht genug Bass oder die restlichen Lautsprecher sind zu laut, wie auch immer.
Was kann ich tun?
there is any way to upgrade my version to v132. I have T019 version...
Hi Benhafsa,
Sorry for any inconvenience caused to you
T019 cannot be upgraded to V132
May I ask if T019 did not meet your expectations? Could you please inform us of your detailed audio requirements?
We have contacted you via email, please take a look. Thank you!
Please rest assured that we will help you solve this problem as soon as possible.
I was contacted by Ultimea, their reply...
"T019 is the last version for factory version V018/V019 we will continue developing more custom software in the future for those versions but for the moment that is the last one."
So I'm holding out hope that we get a newer version.
Please kindly tell us what's a 'Surround Stone key' supposed to be.
Hello Nacho Libre,
The "Surround Stone key" you mentioned should actually be to the right of the "SURROUND" button on the remote control, which is the position marked as "2" in the button in the above picture. This button is used to query the firmware version information. We have corrected the original inaccurate statement. If you have other questions or need further help, please feel free to contact us.
Please sign in to leave a comment.