Search

Poseidon D60 Customized Software-T019(Bass Enhanced)

Ultimea
Ultimea

Note: 

①Before upgrading this version, please make sure your factory software version is V018 or V019, if you are not sure, please contact support@ultimea.com

②If the sound quality of the factory version meets your requirements, we do not recommend switching software versions 

 

The main improvements in this software version are as follows:

T019 adds a BASS 2 level and has a total of 5 levels of bass volume adjustment. （BASS level：-2, -1, 0, 1, 2）

Upgrade method:

1. Download the Binary file in the root directory of the USB flash drive;

Note:

①. Use an empty USB flash drive, USB format: FAT32, 128GB or less capacity;

②. The file name must be spupdate.bin;

2. Insert the U disk, automatically switch to the USB source, and long press the surround left button, as shown in the right picture button 1;

3. After the update is completed, it will automatically restart;

4. Press and hold the Surround stone key for 5 seconds, as shown in the figure below, button 2, version number T019, indicating that the upgrade is successful.

Was this article helpful?

1 out of 1 found this helpful

Have more questions? Submit a request

Comments

4 comments

Date Votes
  • Comment author
    Gabbie Mcconigly

    do u have sound issues too nick? like your left and right sound more quiet compaired to the rest and on eq 3 dose your rear speakers still work and dose -2 turn off your subwoofer?

    0
  • Comment author
    Nick 
    I think it's intentional that the rear speakers are off at -2.
When you listen to music and have EQ 1 or 2 on, I strangely hear almost nothing on the rear speakers, even at the highest level.
But if you turn on a film or series, it's normal and you also have sound at the back on EQ 1 or 2.
I tested it with the trailer for the film Reptil on Netflix.
In summary: EQ 1 and 2 don't really work with the rear speakers when playing music, but they do when playing a film, which is strange.
According to the operating instructions, eq 3 is supposed to be for music.
    0
  • Comment author
    Ultimea

    Answer #8280

    Each of our EQ modes defaults to Surround Level and Bass Level. if it doesn't match your audio preferences, you can adjust it yourself. EQ and Bass can be set based on your audio needs. EQ 3 is used to be for music.

    If this issue persists, please contact Ultimea customer support at support@ultimea.com for further assistance. We will service you ASAP!

    0
  • Comment author
    Ultimea

    Answer #8281

    The surround speakers have four volume levels: SR-2, SR-1, SR 0, and SR 1, with the following functions.
    SR-2: Turns off the surround sound;
    SR-1: Reduces the surround volume level (based on SR 0); SR-0: Default surround volume level; SR-1: Default surround volume level; SR-1: Default surround volume level.
    SR-0: Default surround volume level; SR 1: Enhanced surround volume level.
    SR 1: Enhances the surround volume level (based on SR 0).

    For further solutions, we will contact you by email.

    0

Please sign in to leave a comment.