Poseidon D60 Customized Software-T019(Bass Enhanced)

Ultimea
Ultimea

Note: 

Before upgrading this version, please make sure your factory software version is V018 or V019 or T20, if you are not sure, please contact support@ultimea.com

If the sound quality of the factory version meets your requirements, we do not recommend switching software versions 

The main improvements in this software version are as follows:

T019 adds a BASS 2 level and has a total of 5 levels of bass volume adjustment. (BASS level:-2, -1, 0, 1, 2)

Upgrade method:

1. Download the Bin file in the root directory of the USB flash drive;
Note:
① Use an empty USB flash drive, USB format: FAT32, 128GB or less capacity;
② The file name must be spupdate.bin;

2. Insert the U disk, automatically switch to the USB source, and long press the surround left button, as shown in the right picture button 1;

3. After the update is completed, it will automatically restart;

4. Press and hold the Surround stone key for 5 seconds, as shown in the figure below, button 2, version number T019, indicating that the upgrade is successful;

Was this article helpful?

3 out of 5 found this helpful

Have more questions? Submit a request

Comments

16 comments

  • Comment author
    Gabbie Mcconigly

    do u have sound issues too nick? like your left and right sound more quiet compaired to the rest and on eq 3 dose your rear speakers still work and dose -2 turn off your subwoofer?

    0
  • Comment author
    Nick
    I think it's intentional that the rear speakers are off at -2.
    When you listen to music and have EQ 1 or 2 on, I strangely hear almost nothing on the rear speakers, even at the highest level.
    But if you turn on a film or series, it's normal and you also have sound at the back on EQ 1 or 2.
    I tested it with the trailer for the film Reptil on Netflix.
    In summary: EQ 1 and 2 don't really work with the rear speakers when playing music, but they do when playing a film, which is strange.
    According to the operating instructions, eq 3 is supposed to be for music.
    0
  • Comment author
    Ultimea

    Answer #8280

    Each of our EQ modes defaults to Surround Level and Bass Level. if it doesn't match your audio preferences, you can adjust it yourself. EQ and Bass can be set based on your audio needs. EQ 3 is used to be for music.

    If this issue persists, please contact Ultimea customer support at support@ultimea.com for further assistance. We will service you ASAP!

    0
  • Comment author
    Ultimea

    Answer #8281

    The surround speakers have four volume levels: SR-2, SR-1, SR 0, and SR 1, with the following functions.
    SR-2: Turns off the surround sound;
    SR-1: Reduces the surround volume level (based on SR 0); SR-0: Default surround volume level; SR-1: Default surround volume level; SR-1: Default surround volume level.
    SR-0: Default surround volume level; SR 1: Enhanced surround volume level.
    SR 1: Enhances the surround volume level (based on SR 0).

    For further solutions, we will contact you by email.

    0
  • Comment author
    jehn

    Hi Ultimea,

    Please i'm currently on T019 and i can see that V132 has more improvements on the bass and surround levels. I would like this for my speaker. Please can i change software versions??

    0
  • Comment author
    Ultimea
    • Edited

    Hello jehn,
    Sorry, your factory version cannot be updated to V132. V132 is only suitable for the factory version V81/V83.
    T019 is the latest upgrade software for factory versions V018 or V019. 

    1
  • Comment author
    jehn

    Please, would it be possible to get the features of V132 for my version?

    0
  • Comment author
    Ultimea
    • Edited

    Hi jehn

    We confirm that your current version T019 cannot download V132.  If you require further assistance, please contact support@ultimea.com.

     

    0
  • Comment author
    jehn

    Please how soon will the mobile app be released???

    0
  • Comment author
    Chris Waites

    Does T019 have the same features as v132? if not when will the T version get the same features? 

    0
  • Comment author
    Ultimea

    Hello jehn&Chris Waites,
    Thank you for your messages.
    T019 cannot be upgraded to V132. We have provided you with a solution via email, please don’t worry~

    0
  • Comment author
    Uli Obendorfer

    Hallo,
    Die Software T019 bringt noch nicht genug Bass oder die restlichen Lautsprecher sind zu laut, wie auch immer.
    Was kann ich tun?

    0
  • Comment author
    Benhafsa

    there is any way to upgrade my version to v132. I have T019 version...

    0
  • Comment author
    Ultimea

    Hi Benhafsa,
    Sorry for any inconvenience caused to you
    T019 cannot be upgraded to V132
    May I ask if T019 did not meet your expectations? Could you please inform us of your detailed audio requirements?
    We have contacted you via email, please take a look. Thank you!
    Please rest assured that we will help you solve this problem as soon as possible.

    -1
  • Comment author
    Gabbie Mcconigly

    yeah ultimea we all have done this and u havent helped most of us Benhafsa please go elts whare do not waist your money or time 

    0
  • Comment author
    Gabbie Mcconigly

    until i see a app in the google play store this system well never be a good choice for anyone just a big defective mess for some who were unlucky and uiltimea still REFUSES to fully fix the situation 

    0

Please sign in to leave a comment.