Bluetooth connection to PC:
Switch the Soundbar to BT mode, open the Bluetooth connection, search for the corresponding BT hotspot of the soundbar to mate, and connect the Bluetooth connection successfully when hearing "connected"
AUX connection to PC:
1. Please use the AUX cable (3.5mm to 3.5mm audio cable) to connect the soundbar AUX interface and PC headphones interface
2. Ensure that the output mode on the soundbar is AUX mode.
3. Open the sound icon in the bottom right corner of the PC, and then click on the headphones icon. The sound output selection is: Headphones (Realtek audio）
4. Make sure the PC and Soundbar volume are opened
1: When in AUX mode, if you need to switch to another output mode, please remember to unplug the AUX cable from two devices.
2: For desktop computers, there is no sound when connecting AUX- only noise:
A: Try changing an AUX cable
B: Switching to a laptop, or replacing the headphone interface at the back of the host
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request