1. Ensure that the projector is placed parallel to the wall/screen and that the table is level;
Make sure the projector is placed in the middle of the projection screen
Make sure the wall/screen is flat, try to project on another wall / Screen;
If the wall or desktop is not flat, try to adjust it by moving it from side to side or by placing the feet high or low;
Try trapezoid correction adjustment, check if the tilt angle of the machine is too large, and do not exceed +- 15 degrees.
Image Tilt / Distortion
Was this article helpful?0 out of 0 found this helpful
Have more questions? Submit a request
Please sign in to leave a comment.