8. Apollo P40 Installation- Instructables

Ultimea
Ultimea
  • Updated

You can choose horizontal placement or hanger installation

 

Note: 

  1. During the installation process, please do not operate with electricity to avoid electric shock hazard and projector circuit failure. 
  2. Please keep a gap of at least30 cm from the wall. Do not cover or block the projector's vents with any objects. Make sure that the projector has enough ventilation to ensure the projector's. performance and reliability 
  3. If you have a projector screen and need to be mounted on a ceiling, the projector cannot be higher than the upper edge of the screen, otherwise it will affect the image effect. 

 

Adjust the image projected on the screen

Check the horizontal and vertical settings of the screen

Apollo_P40_Installation-_Instructables_-_01.png

 

Ceiling installation

Apollo_P40_Installation-_Instructables_-_02.png

  1. Please purchase an universal projector ceiling mount;
  2. Remove the four rubber pads on the button of the projector, you will see the screw holes and use the M6*11mm screws for installing the ceiling,and then install it. 

Adjust the projection mode by selecting Settings-Projection image Settings-Install Mode-Front Desktop/Rear Desktop/Front Ceiling/Rear Ceiling

Hanger_installation.png

 

If you have additional questions, please contactUltimea customer support at support@ultimea.com for further assistance.

Was this article helpful?

0 out of 1 found this helpful

Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.